Setting up a Brick Paver Walkway or Blue Bricks

The use of Bricks or Pavers to create a sidewalk or patio area complements a house in a way that is unmatched. In addition, setting up a Brick or Paver walkway does not necessarily require a pro.

The key to setting up a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be set up. In addition, string lines ought to be strung on each side of the sidewalk.
Once the area has been dug down, 3/4" gravel stone must be laid in and tamped down firmly. The height in between the tamped down sand and the stringline need to equal the thickness of the brick or paver.

Now that you have a steady base, position a 1" pipe or ledger board the length of the pathway on either side of the sidewalk. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up an operate on both sides of the prepared location. These strips will function as your sidewalk border and help to maintain the integrity and shape of the sidewalk. You can get these plastic strip borders at a lot of house enhancement shops. The strips should be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger surrounding rows of bricks by check here 1/2 of a brick to interlock them. This will once again assist keep the stability of the sidewalk.

Undoubtedly bricks/pavers will require to be cut or divided when developing the sidewalk. To in fact cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outside edges with extra sand, and then shovel in the topsoil and pack down strongly.
Finally, spread stone dust over the brand-new walkway and sweep into the fractures. Repeat this procedure a couple of times to ensure the fractures are completely filled. This will finish the interlocking of the bricks and assist to get rid of any weed growth. Simply include turf seed to the outdoors edges and you ought to have a lovely entryway to your house within a couple of weeks.


In addition, setting up a Brick or Paver sidewalk get more info does not necessarily require a pro. The key to installing a Brick or Paver Walkway is to very first effectively prepare the area where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipe or ledger board the length of the sidewalk on either side of the sidewalk. These strips will act as your sidewalk border and aid to preserve the stability and shape of the pathway. Undoubtedly bricks/pavers will need to be cut or divided when developing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *